SAX ACP4D

SAX ACP4D is TCP/IP 4 door 2 way access controller. It uses standard industrial TCP/IP network. There is no limitation on device quantity. It has built in web management and can be managed directly. It connects 8 readers to realize card swiping for door entry or exit and anti pass back.

Features
  • Integrates 10M TCP/IP communication with excellent transmission performance
  • Flash memory card with big capacity can keep data for 10 years If the electricity goes off
  • Hardware has webserver function, management and real time monitor can be realized without installing software
  • Support card readers to realize going in and out by swiping card
  • 16 time zone groups and each group can choose different verification methods
  • Support multi verifications: card, card + password, double cards, first card opening, timing door force open or close, timing alarm
  • Support remote operation of door and alarm, fire alarm opening or closing
  • Support door locking through software or WEB interface
  • Support anti-pass back going beyond access controllers
  • Support alarm output of multi events like invalid card and time, door alarm, door open overtime
  • Wiegand interfaces are Compatible with wiegand 26/34/37 protocol
  • Automatic data sending, and transporting is not influenced by quantity of controllers
  • Support the setting of every card's valid time
  • All of our access controllers support 485, TCP/IP controllers' mixing installation
  • Support real time management monitor by multi users and multi devices
  • Network real-time monitor can be realized working with web map
Specification
  • Card holder: 54000 cards
  • Logs: 60000 records
  • Alarm events: 10000 events
  • Communication: TCP/IP
  • Communication distance: no limitation
  • Card reader: Wiegand 26/34 reader
  • Card reading distance: 3-10cm
  • Verification: card, card + password, double cards, password
  • first card opening, release button
  • Remote opening from software

 

  • Main board size: 218*130*23mm
  • Main board color: Deep blue
  • Main board weight: 160g
  • Box color: Black
  • Box size: 285*240*82mm
  • Working temperature: <60 degree
  • Environment humidity: 10%-95% R.H
  • Working voltage: 12V
  • Working current: <150ma
  • Rated power: =10W
  • Power-off protection: 10 years
Product Enquiry
 

c3400

C3-400’s versatile design features take care of present and future needs with ease and efficiency. It is one of the most rugged and reliable controllers on the market , with a multitude of built-in features. The C3-400 can communicate at 38.4kbps via RS485 configuration or Ethernet TCP/IP networks. It can store up to 30,000 cardholders. SDK (Software Development Kit) is available for the customer to integrate the controller into existing access control software or to develop new software.

Features
  • Over-current protection, over-voltage protection, and reversal protection for the power supply and all of the input and output terminals
  • Reliable network system of controllers using either TCP/IP or RS-485 Serial communication
  • Supports different Wiegand formats, and connects to ZK readers as well as HID, Mifare, and generic ID card readers
  • Connects with a variety of electric locks, sensors, exit buttons, alarm devices, and indicators
  • Can be integrated with other security systems such as CCTV, Intrusion Detection, Fire Alarm Release, and elevastor Control for total security system. Directly
       compatible with ZK’s biometric reader controllers.
  • Easy-to-use and intuitive programming with ZKAccess Software
  • System management by browser from client PC’s. No need to install software on each client
  • Programming of special logic between doors is set up with simple pull down menus. No special scripts or code is required.
  • Management software allows indication of real-time door status and remote commanding of door open/close state. Alarm conditions such as
       forced open and extended open alarms are reported.
  • Advanced access control capabilities are built into the hardware, including anti-passback, Dual and multi-Card Authentication, and Duress Mode.
Specification
  • Model : C3-400
  • CPU: 32bit MIPS CPU
  • Flash Memory : 256M Bits
  • User : 30, 000
  • Event Buffer : 100, 000
  • Power/ Current : DC 9.6V-14.4V, Rated max.1A
  • Reader Port : 4ea (26bit Wiegand, 8bit for PIN)
  • Communication : RS485, TCP/P
  • Baud Rate : 38,400bps (Recommended)/ 9600bps,
        57,600bps (Selectable)

 

  • Input Port : 12ea (Exit Button#1, Exit Button#2,
       Button#3, Button#4, Door Sensor#3,
       Door Sensor#4,Sensor#1, Door Sensor#2,
       Door Output Port : 4ea (4 FORM-C Relay Output,
       SPDT SPDT 5A@36VDC/8A@30VAC)
  • LED Indicator : Yes, LED indication for
       communication, Power, Status and punch card
  • Operating Temperature : 0 to 55C
  • Operating Temperature : 10% to 80% relative humidity
       non-condensing
  • Dimension (mm) : 218(w)*106(H)(single board)
Product Enquiry
 

BIO 460

In BIO 460 is the most advanced access control panel which can provide biometric security for any door when connected with biometric readers and the software. These panels are versatile and can connected with RS485 or Weigand connectivity to the panels. With the help of ZK Access software the user will get the flexibility and scalability to program the access control system. The software is web based and hence can be accessed from any computer with the help of a web server.

Features
  • Over-current protection, over-voltage protection, and reversal protection for the power supply and all of the input and output terminals
  • Reliable network system of controllers using either TCP/IP or RS-485 Serial communication
  • Supports different Wiegand formats, and connects to ZK readers as well as HID, Mifare, and generic ID card readers
  • Connects with a variety of electric locks, sensors, exit buttons, alarm devices, and indicators
  • Can be integrated with other security systems such as CCTV, Intrusion Detection, Fire Alarm Release, and elevastor Control for total security system. Directly compatible with ZK’s biometric reader controllers.
  • Easy-to-use and intuitive programming with ZKAccess Software.
  • System management by browser from client PC’s. No need to install software on each client
  • Programming of special logic between doors is set up with simple pull down menus. No special scripts or code is required.
  • Management software allows indication of real-time door status and remote commanding of door open/close state. Alarm conditions such as forced open and extended open alarms are reported.
  • Advanced access control capabilities are built into the hardware, including anti-passback, Dual and multi-Card Authentication, and Duress Mode.
 
Specification
  • Model : inBIO460
  • CPU : 32bit MIPS CPU
  • RAM : 32M bits
  • Flash memory : 128M bits
  • Fingerprint Capacity : 3000
  • Card Capacity : 30.000
  • Event Buffer : 100.000
  • Power/Current : DC 9.6v-14.4v.Rated Max0.5A
  • Wiegand Reader Port : 4nos. (26/34bit wiegand,
       4/8Bit Burst for pin)
  • RS485 Reader Port : 1no.Extended RS485 Port
  • Communication : RS485, TCP/P
  • Baud Rate : 38.400bps(Recommended)/9600bps,
       19.200bps, 57,600bps (selectable)

 

  • Input port : 12nos. (Exit Button#1, Door Sensor#1;
       Exit Button#2, Door Sensor#;Exit Button#3,
       Door Sensor#3; Exit Button4, Door Sensor#4,
       4 Aux input) Out Port : 4nos.( 4 Form-c Realy Output,
       SPDT 5A @36VDC/8A@30VAC) 4nos.( 4 Aux Form-c
       Relay Output, SPTD 2A@30VDC)
  • LED Indicator : LED indicated for communication,
       Power, Status and valid card read
  • Operating Temperature : 0C – 55 C
  • Operating Humidity : 10% to 80% relative humidity
       non-codensing 226*106*36(Single board)
  • Dimention(H*W*D)mm : 400*330*90.5(with power
       supply and metal cabinet)
  • Software : ZKAccess 5.22
Product Enquiry